Notification/Circular No. – F. No. PNGRB/Tech/18-penalty-T4SReg./(9)/2024/(E-5488)/7 dated July 23, 2025
Applicable Act/Rule – Petroleum and Natural Gas Regulatory Board Act, 2006
The PNGRB has amended the 2019 Technical Standards and Safety Standards for LPG Storage, Handling, and Bottling Facilities. The revision strengthens compliance, monitoring, and penalty provisions. The earlier framework was limited in terms of enforcement and did not provide detailed procedures for penal action in case of violations.
Existing Regulation 8, shall be substituted as under:
“ (1) There shall be an established comprehensive system to ensure compliance with the provisions of these regulations, encompassing the conduct of technical and safety audits throughout the stages of design, pre-construction, construction, commissioning, and operation, and also on an ongoing basis, as periodically specified. Details of any planned project along with Detailed Feasibility Report (DFR), layout, PESO approval and Environmental Clearance etc. as may be applicable, shall be submitted to Board at least one month prior to commencing the construction.
(2) The Board shall monitor the compliance with Technical Standards and Specifications, including Safety Standards, either directly or through an accredited third party via separate regulations on third-party conformity assessment.
(3) For the purpose of these Regulations, in event of any default or deviation or shortfall, the entity shall be liable to face the imposition of civil penalty as per Section 28 of the PNGRB Act, 2006 and/or suspension/termination of operation, as per following procedure:
Provided that, notwithstanding anything contained in clauses (a) to (d) of sub-regulation (3), in cases
Disclaimer: The information contained in this Article is intended solely for personal non-commercial use of the user who accepts full responsibility of its use. The information in the article is general in nature and should not be considered to be legal, tax, accounting, consulting or any other professional advice. We make no representation or warranty of any kind, express or implied regarding the accuracy, adequacy, reliability or completeness of any information on our page/article.